Здравствуйте, Гость ( Вход | Регистрация )

Reply to this topicStart new topic
D9h bevel gear shaft ?
сообщение Oct 25 2017, 09:03
Сообщение #1

Advanced Member

Группа: Members
Сообщений: 35
Пользователь №: 759


So I've working on a d9h that had a steering clutch non release issue. What had happened was the outer hub walked loose and the nut and the lock bold ended up in the basket. When the clutch was applied it caused the clutch to smash and jam.
The last owner pulled the outer shaft and fixed and pressed a new hub on. They changed the piston seals but didn't do the swivel seals behind the hub.

When we got to the machine we tested it and found the swive seals were gone. We also checked runout on the inner hub and found 10 thousandths run out on it.
We pressed the hub off and found what looked like the front half of the taper belled.( looked looseand worn)

Please help.

I didn't find the right solution from the Internet.


marketing video
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0


Текстовая версия Сейчас: 21 November 2018 - 20:42 PM
Rambler's Top100